Category
12 articles
Fixings are the cheapest line on most timber jobs and the most common reason for a callback. Here's how to match bright, galvanised, stainless and coated metal to fences, decks, cladding and shed frames without paying for protection you don't need.
Most garden gates don't fail because the timber was poor. They fail because the post, frame, brace and hardware were chosen as separate parts rather than one moving system. Here's what to get right before the boards leave the yard.
Timber lead times stretch in December, and the yard calendar matters as much as the price list. Here is how to work backwards from Christmas without panic-buying wet boards in the middle of the month.
The driver is already holding out the pen, and the kettle's boiled. But those ten minutes at the tailgate are where timber disputes are won or lost — not at the trade counter a fortnight later. Here's what to count, prod and photograph before your name goes on the line.
A shelf is a beam, even when it looks like a simple plank. Here is how to choose common UK timber sizes, bracket spacing and board material so shelves stay flat under books, tools and kitchen clutter — and when plywood or a deeper section is the better buy.
CLS, C16 and the trusty 4x2 get talked about as if they are interchangeable. They are not. Here is how to specify studwork timber that arrives straight, grades honestly and suits the wall you are actually building.
The back of a woodyard is where the honest bargains live — and where a careless buyer can pick up a pile of future firewood. Here is what shorts, seconds and offcuts actually mean, how to ask for them, and how to tell a deal from a dud.
Five minutes at the rack saves five months of fighting a board that was never going to sit flat. Here is what to look at, in what order, and which defects actually matter for the job you have in mind.
Grain is not decoration. It tells you how a board was cut, which way it wants to move and where it will fight back when you saw, screw or plane it. Here is how to read it at the woodyard and pick the right board for shelves, frames and joinery.
A 4x2 is not 4 inches by 2 inches, and a 100x50 might not finish at 100x50 either. Here’s the straight supplier’s guide to nominal sizes, planing allowances and ordering timber that fits first time.
Treated timber can mean a properly specified ground-contact post or a lightly dipped batten that will not last a wet winter. This guide explains use classes, pressure treatment, end grain and the questions worth asking before you pay.
Budget timber has its place, but these five jobs are where saving a few quid on boards tends to come back as warped floors, rotten cladding and repeat labour. A fair look at when to upgrade.